Connect with us

Tech

Arduino’s Plug and Make Kit lets your hacking imagination run wild, sans solder

Published

on

Arduino’s Plug and Make Kit lets your hacking imagination run wild, sans solder

Enlarge / Having this on the wall, right by your front door, would serve the purpose of informing guests where your priorities lie.

Arduino

I know how to solder, but I do not always want to solder, and I think there are a lot of folks like me. Even if the act itself can be done (and undone, and redone), the friction of hauling out the gear, preparing a space, and fine-motor-skilling a perfect shiny blob can put a halt to one’s tinkering ambitions.

Arduino’s Plug and Make Kit official release video.

Arduino, the building block of many off-hours projects, has put the challenge to you, your kids, or anyone you know who just needs the right kit to fall down a rabbit hole, minus a dangerously hot iron. The Arduino Plug and Make Kit has at its core an Arduino UNO R4 board with Wi-Fi, Bluetooth, and a built-in 12×8 LED matrix display. That board gets screwed into the prime lot on a yellow board, and then you pick from among seven other “Modulino” boards to attach. By “attach,” I mean running one of those little push-in-with-your-fingers cables from the main board to a little board, and maybe daisy-chaining from there. All your boards fit onto the larger base with M3 screws and nuts, and the whole thing is powered by a USB-C cable (with USB A or C on the other end).

What can you plug in? A knob, eight LEDs, a proximity sensor, a motion sensor, a simple buzzer/speaker, a temperature/humidity sensor, and three simple buttons. With those things, the newcomer can make a low-key weather station, an 8-bit-style synthesizer, a smart lamp controller, and a few other things (registration required). Of course, those are just the starter projects put together by Arduino; on the web, in the corners of GitHub, and inside the curious mind, there are loads of other things to be built.

There’s a little shell case for the main Arduino board included with the kit, which could help with weather-proofing a bit. But whatever project you make with this kit is going to look like a lightly spiffed-up breadboard object. That can be a great thing. The timer I use to try to keep myself working in 25-minute segments is an Adafruit Circuit Playground Express, programmed to light up in a clock-ish ring and then play the Legend of Zelda “discovery” tune after every sprint. There are lots of timers, even Pomodoro-technique-specific models, that are cheaper, smaller, and purpose-built. But I like my goofy little timer specifically because I can see the guts of it.

The Arduino Plug and Make Kit costs $87 (USD) at the moment and was still in stock as of this writing.

Continue Reading